![](https://www.paj-gps.com/wp-content/uploads/2024/01/PAJ-CAR-OBD-Finder-4G.png)
QUICKSTART-GUIDE
Please follow these simple steps:
![](https://www.paj-gps.com/wp-content/uploads/2024/01/sim.png)
1. Activate your Device
• Choose a subscription duration
• Select a service package (optional)
• Make payment
![](https://www.paj-gps.com/wp-content/uploads/2024/05/electricity-2.png)
2. Connect your device
• Go outside and turn on the device
• Walk around for several minutes
• The device calibrates itself automatically
![](https://www.paj-gps.com/wp-content/uploads/2024/01/pin.png)
3. Locate your device
• Download the FINDER Portal App
or
• Access the FINDER Portal through your desktop browser
FAQ – CAR OBD Finder 4G 2.0
![](https://www.paj-gps.com/wp-content/uploads/2024/04/CAR-OBD.jpg)
![](https://www.paj-gps.com/wp-content/uploads/2024/04/c2.jpg)
You can switch on the CAR OBD Finder 4G 2.0. By connecting the FINDER to the power supply the device has already been switched on
Orange LED – GSM status ![Orange LED](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSI5MCIgaGVpZ2h0PSI4NiIgdmlld0JveD0iMCAwIDkwIDg2Ij48cmVjdCB3aWR0aD0iMTAwJSIgaGVpZ2h0PSIxMDAlIiBzdHlsZT0iZmlsbDojY2ZkNGRiO2ZpbGwtb3BhY2l0eTogMC4xOyIvPjwvc3ZnPg==)
Signal | Meaning |
---|---|
The orange LED is blinking | There is no available GSM signal |
The orange LED is off | The GPS Tracker is in standby mode or switched off |
The orange LED is fixed | A GSM signal is available |
Blue LED – GPS status ![Blue LED](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSI3OCIgaGVpZ2h0PSI3NyIgdmlld0JveD0iMCAwIDc4IDc3Ij48cmVjdCB3aWR0aD0iMTAwJSIgaGVpZ2h0PSIxMDAlIiBzdHlsZT0iZmlsbDojY2ZkNGRiO2ZpbGwtb3BhY2l0eTogMC4xOyIvPjwvc3ZnPg==)
Signal | Meaning |
---|---|
The blue LED is blinking | There is no available GPS signal |
The blue LED is off | The GPS Tracker is in standby mode or switched off |
The blue LED is fixed | A GPS signal is available |
Please have a look at our
If the route recording is not working please try to restart your device.
Make sure your FINDER is charged & switched on.To assist the connection, move the FINDER (short walk/drive) and restart if needed. If the FINDER still doesn’t connect, contact our support.
Ensure your device has a stable network connection & perform a power cycle by turning the device on and off.If it still doesn’t work please contact our support team .
Try using a different wall plug or charging cable, and ensure to turn on and off the device as part of the troubleshooting process
Support
Our In-House Customer Service Team will be happy to assist you with any questions related to your product.